lasermarkscompany

Marking and Engraving Across All Industries


Leave a comment

Specialty Pistol Engraving with MOPA lasers at Laser Mark’s

police-range glock-dark-marking-sj-police-logo glock-swat-dark-marking-on-slide marine-logo

Laser Mark’s Company is proud to be the engraver of choice for many local law enforcement professionals. Our MOPA laser system can be programmed to etch, burn, lighten, or smooth. The logo is permanently marked and blends into the natural gunmetal background for tactical safety. We custom redraw logos from many artworks and even patches to make the finest use of our MOPA lasers capabilities. While this may be more time consuming, the quality of the effort shows off the pride of our first responders.

Laser Mark’s Company is happy to provide this service to any licensed individuals as well.  Some of our engraving requests have been quite creative.

smile-gunglock-dark-marking-on-slide

 

 

Advertisements


Leave a comment

Gun Engraving at Laser Mark’s Company

AR-15 Aluminum Receiver

AR-15 Aluminum Receiver

Maple Wood Stock

Maple Wood Stock

M1911 Steel Receiver

M1911 Steel Receiver

The 211 Division AR-15's

The 211 Division AR-15’s

Block Steel Slide

Glock Steel Slide

Precision, artistic, and permanent marking on many different surfaces. Laser Engraving will never replace traditional scroll work from an artisan. Yet laser marking adds the ability to rapidly make custom designs.  Adding pulse control from MOPA Fiber Lasers allows for variable depths, remelts, textures, and contrasts.   AR-15 Receivers are marked with a the “211” Division logo of the SJ Police. The same logo was etched onto a wood stock for a gift for the retiring Lieutenant as well as the M1911 belonging to the Desk Sergeant. And note the Cross on the Glock21 slide. Zoom in on the photo and note that  the engraving is both  deep and smooth.  This is due to the versatility of MOPA wave forms which can create a clean surface that does not attract rust.  Laser Mark’s Company has all the tools!


Leave a comment

Gold Marking on Electronic Packaging

Finally a Gold marking process that does not remove the plating!  Electronic devices are plated with 50 micro inches of Gold over 200 micro inches of Nickel.  All previous attempts at laser marking vaporized both Gold and Nickel exposing the base metal Kovar which corrodes.  The Laser Mark’s Company “Light Touch” process just kisses the top layer at the point of coupling and then stops reaction.  This is why it is critical to define that transition point between reflection and laser coupling.   The process is made possible using the magic of Wave Forms on the MOPA fiber lasers.   The pulse width is shortened, and the power density is increased such that only the top surface of the gold is ablated.  This process is perfect for military, aerospace, and other devices destined for harsh environments.  Process is also possible with the new SPI EP-S-J series of lasers

blog2


Leave a comment

Precision Array Production

Laser Mark’s Company has wide field F-theta lenses combined with precision motion control.   Together we can create marking programs for high volume processing.  Time is money and with the right kind of fixturing, enable marking costs to be greatly reduced.  Laser Mark’s Company has 6 MOPA Fiber Laser systems in addition to Single Mode 2.2mJ high power DPY and a Galvo CO2.  Come to Laser Mark’s Company to develop a process to meet your needs.

Array 2


Leave a comment

Laser Mark’s Company Retires last Flashlamp YAG

Yes, the old Lee lasers have been put out to pasture.  (Actually they were sold off to a research institute at a university).   All our 1064nm lasers are now solid state.  This means no more variability in the quality of the mark as the lamps degrade over time.   All Laser Mark’s Company machines are now maintenance free.  That eliminates down time and makes pulse to pulse stability issues a thing of the past.   All laser pulses now are clones of each other.   We are the only job shop in Silicon Valley to be fully solid state in 1064nm and our CO2 system is sealed as well.   Come to Laser Mark’s Company for reliability and quick turn production.


Leave a comment

Mr. Laser Returns to Laser Mark’s Company

After 4 years working in the worlds finest laser labs, Mark Brodsky returned to rebuild, refresh and fully renovate Laser Mark’s Company.  His goal will be to update the company with the best tools in the industry.  New hardware; New Software; and perhaps soon a new facility.

We are adding new laser technology previously available to just the Fortune 500 companies.  Laser Mark’s Company is the only Job Shop in Silicon Valley with MOPA Fiber technology.  And we have Four of them!!!

Read the technical description on page 36 of this article from MepCon magazine http://issuu.com/mepcom/docs/meptec_report_spring_2012


Leave a comment

Laser Mark’s Company Adds 4th MOPA Fiber Laser

MOPA fiber opens the door to many competitive advantages for etching, polishing, trimming, marking, engraving, serializing, micro welding, thin metal cutting and coloring on all sorts of materials.

Mr. Laser has written an article for Optics and Photonics News to describes this exciting new technology.  Click on this link http://www.osa-opn.org/Content/ViewFile.aspx?id=13264 to read the full article.