lasermarkscompany

Marking and Engraving Across All Industries


Leave a comment

Gun Engraving at Laser Mark’s Company

AR-15 Aluminum Receiver

AR-15 Aluminum Receiver

Maple Wood Stock

Maple Wood Stock

M1911 Steel Receiver

M1911 Steel Receiver

The 211 Division AR-15's

The 211 Division AR-15’s

Block Steel Slide

Glock Steel Slide

Precision, artistic, and permanent marking on many different surfaces. Laser Engraving will never replace traditional scroll work from an artisan. Yet laser marking adds the ability to rapidly make custom designs.  Adding pulse control from MOPA Fiber Lasers allows for variable depths, remelts, textures, and contrasts.   AR-15 Receivers are marked with a the “211” Division logo of the SJ Police. The same logo was etched onto a wood stock for a gift for the retiring Lieutenant as well as the M1911 belonging to the Desk Sergeant. And note the Cross on the Glock21 slide. Zoom in on the photo and note that  the engraving is both  deep and smooth.  This is due to the versatility of MOPA wave forms which can create a clean surface that does not attract rust.  Laser Mark’s Company has all the tools!

Advertisements


Leave a comment

Class I Laser Processing Station

laser process systemLaser Mark’s Company introduces a family of Laser Processing Work Stations.

The system is CLASS I certified and can be configured for many different laser processing functions. This allows the user to perform R&D and then easily convert the machine to production use.  The enclosure also includes vibration isolation features in its framing as well as baffled access ports for dust  vacuum and processing gas.

The Processing Station can accept a wide variety of lasers and controllers, multiple vision systems, and motion systems up to 300mm x 300mm. Now available as a standard platform for industry and analysis.


Leave a comment

New Custom Disk Marking Machine

Marking Chamber and Label locations1 System 1

In a reversal of a national trend, a fully integrated Class I Disk Marking machine was recently created by Laser Mark’s Company and shipped to Asia. Laser Mark’s Company has the knowledge base in both lasers and systems integration to service industries world wide. And our new emphasis on CDRH compliance allows us to create custom Class I laser devices for your manufacturing need.


Leave a comment

Metal Transfer onto Glass with Laser Ablation

                                         Ablative Metal Transfer

A new way to permanently apply metal onto glass by laser ablation was developed at Laser Mark’s Company.  Previous through glass ablation efforts did not provide high adhesion and could be easily rubbed off.  The Laser Mark’s Company process combines a specific MOPA pulse width to simultaneously couple with the glass surface when vaporizing a sacrificial adjacent metal shim.  The vaporized metal fully adheres to the glass that is selectively heated.  No stress to the glass is applied and the process works with Brass, Stainless Steel, and even aluminum.   Note on the video how the metal can not be removed even by a high pressure erasure.   Laser Mark’s Company can do this as a job shop service or design a custom laser system for in-house processing.


Leave a comment

New 1 mm Thick Smooth Silicon Cutting at Laser Mark’s Company

DSC06746Finally, the ability to smoothly laser cut 1 mm thick silicon into complex shapes without high pressure gas  and  high wattage – high heat processing.  Laser Mark’s Company MOPA fiber lasers optimizes pulse energy properties to smoothly etch out a kerf with only a 6 degree angle.   Kerf widths are less than 200 microns and net average cutting speed is over 11mm per minute.  Laser Mark’s Company can perform this service as a job shop or design a system for your own in house use.  Thinner silicon cuts exponentially faster.  Higher energy – higher speed roughing cuts are also available. 


Leave a comment

Gold Marking on Electronic Packaging

Finally a Gold marking process that does not remove the plating!  Electronic devices are plated with 50 micro inches of Gold over 200 micro inches of Nickel.  All previous attempts at laser marking vaporized both Gold and Nickel exposing the base metal Kovar which corrodes.  The Laser Mark’s Company “Light Touch” process just kisses the top layer at the point of coupling and then stops reaction.  This is why it is critical to define that transition point between reflection and laser coupling.   The process is made possible using the magic of Wave Forms on the MOPA fiber lasers.   The pulse width is shortened, and the power density is increased such that only the top surface of the gold is ablated.  This process is perfect for military, aerospace, and other devices destined for harsh environments.  Process is also possible with the new SPI EP-S-J series of lasers

blog2


Leave a comment

Precision Array Production

Laser Mark’s Company has wide field F-theta lenses combined with precision motion control.   Together we can create marking programs for high volume processing.  Time is money and with the right kind of fixturing, enable marking costs to be greatly reduced.  Laser Mark’s Company has 6 MOPA Fiber Laser systems in addition to Single Mode 2.2mJ high power DPY and a Galvo CO2.  Come to Laser Mark’s Company to develop a process to meet your needs.

Array 2